I'm going to turn to my 40 this summer and I have decided to cross the bridge that I've been looking for a while enviously. I mean I want to get a Sub: sorry guys but this one is my gral (so far ), may be because I'm a diver too
I've started to work around the models and I have let on the side the 6 digits ones: too glossy, too big, too... Anyway, I will look for a 5 digits one 16610, 14060, 14060M. Since I like the cyclop 16610 will me my target And since I like the engraved rehaut it will be 16610 series M or V
So, since this model is not anymore available at AD/Rolex shops I have to look for a second hand. I have already checked couple of shops (Far East/Golden Landmark Shopping Complex/Lucky plaza) and hopefully I have read a lot of post from the forum with good advices
I still have couple of questions, excuse me for my ignorance:
- Is there any thread with a 2nd hand dealer list? and comments about their reliability: sorry but I did not find even with the search tool... I see in some posts only the 1st letter of dealer or shop but not clear
- Before to buy, it would be a must to get the watch verified: by a RSC. this check can be done in any RSC for about ~100$, correct? or if not possible to indicated on the bill that after check if there is something wrong I must be fully reimbursed
- If I buy and bring it to a RSC for general cleaning/verif/lubrification... they could be in position to tell me if something is wrong in the box, right? Would you have any idea how much is this service cost?
Thank you for your help and tips!!! This forum is a must!!
I'm excited but do not want to be screwed
I'm going to turn to my 40 this summer and I have decided to cross the bridge that I've been looking for a while enviously. I mean I want to get a Sub: sorry guys but this one is my grail (so far ), may be because I'm a diver too
I've started to work around the models and I have let on the side the 6 digits ones: too glossy, too big, too... Anyway, I will look for a 5 digits one 16610, 14060, 14060M. Since I like the cyclop 16610 will me my target And since I like the engraved rehaut it will be 16610 series M or V
So, since this model is not anymore available at AD/Rolex shops I have to look for a second hand. I have already checked couple of shops (Far East/Golden Landmark Shopping Complex/Lucky plaza) and hopefully I have read a lot of post from the forum with good advices
I still have couple of questions, excuse me for my ignorance:
- Is there any thread with a 2nd hand dealer list? and comments about their reliability: sorry but I did not find even with the search tool... I see in some posts only the 1st letter of dealer or shop but not clear
- Before to buy, it would be a must to get the watch verified: by a RSC. this check can be done in any RSC for about ~100$, correct? or if not possible to indicated on the bill that after check if there is something wrong I must be fully reimbursed
- If I buy and bring it to a RSC for general cleaning/verif/lubrification... they could be in position to tell me if something is wrong in the box, right? Would you have any idea how much is this service cost?
Thank you for your help and tips!!! This forum is a must!!
I'm excited but do not want to be screwed
Hi,
Congratz and I'm sure this process in looking for your grail will be exhilarating. But let me first try to answer your qns:
I do not recall of any thread here that sees a consolidation of pre-owned watch dealers in Singapore, with reviews. However, for a start, there is a number of watch dealers' ads in the forum which you may begin to approach. I have not heard anything adverse about them and these dealers/companies have been around for a long time.
Unfortunately, the RSC in Singapore has recently dropped the watch authentication service, and they no longer accept any ROLEX and Tudor watch for verification. You may have to seek a third party watch technician or shop to do that for you, and yes, for a fee too.
Alternatively, since you have the intention to send the watch to RSC for "general cleaning/verif/lubrification...", RSC can and will inform you if the watch is not authentic. This is because RSC will not accept a fake/stolen watch for whatever services you want them to do. And of course, there is a fee for most services you engage RSC to do. As for how much, best you check with them because fees varies depending on what you request for, and what RSC deem necessary to do.
Ok so, I will continue to pick adds and info from the different thread to get additional shops to visit
For RSC, if they discover something wrong during the servicing, this should be ok to be reimbursed by the dealer. I just have to ask the dealer to write it down before paying. Understood !
As for reimbursement/refund by the dealer, it is better you make this clear to the dealer before the purchase. It can be a little tricky and miscommunication may happen. At the very least, as a responsible buyer, you should not delay too long to get the watch checked after purchase so that if anything really goes wrong, you can immediately go back to the dealer to settle it. Most dealers I have come across are ok.
Hi all elder. I m a newbie here. Planning to get my 1st Rolex. In my mind there are 2 options. Batman 116710blnr or green hulk 116610lv. Which is recommended for the 1st watch? Thanks
Hi all elder. I m a newbie here. Planning to get my 1st Rolex. In my mind there are 2 options. Batman 116710blnr or green hulk 116610lv. Which is recommended for the 1st watch? Thanks
Hi and welcome to the Club
If you are one who plays safe, it'll be the Batman. Black dial, half black bezel with a bit of blue. If you like it a little louder, then the Hulk. So for a first ROLEX watch, and subject to what you have in your current collection, the Batman can come first.
If you are one who plays safe, it'll be the Batman. Black dial, half black bezel with a bit of blue. If you like it a little louder, then the Hulk. So for a first ROLEX watch, and subject to what you have in your current collection, the Batman can come first.
Hi Oceanklassik, Thanks for your powerfully view. I will go for the Batman. Thank you.
Newbie here,
Planning to get a Daytona half gold version. Any shops to recommend? Considering new or preowned, budget below $20K.
Thank you.
I believe many shops carry this model, from the ADs to second-hand shops and dealers. And with your budget, I think getting a new one isn't really a problem. The retail price was $22,730 for both black and white dial, in December 2016. You may get a better price from grey dealers/shops if you are paying in cash. You may wish to consider approaching the forum advertisers to check it out.
Comment