repair of clock opening dial hinge

[simonn]

any bros any recommend any repairer? tks in advance

[triton]

eh. sorry, dont get which part needs to be fixed. is it the dial hinge? the door of the clock hinge?

[simonn]

yes bro clock face door hinge

[triton]

got picture of hinge ?

[simonn]

sorri bro, i didnt have the pic.....its exactly like a door hinge only smaller in size

[triton]

do you need to replace the hinge or put the screw back in? do you know any carpenter? you can get a carpenter to do it.

if you want to DIY, visit any hardware shop and look for those hinge or similar and get the screws and DIY.

if you need special screws, can head to sungei road there, there is one shop specialize in selling screws. you may also consider going to ubi area, opposite aztech building, ground floor also got one shop selling screws.

if you need to get filler for the wood, just head to DIY shops, they should have. fill it up and it will be alright.

as i stay east, there are couple of places i know that may have those hinge. go to geylang(direction to bedok), there is this shop called builder something, near lorong 10-12 there located on the right hand side. alternatively drive further down till u get to the first set of traffic lights, near lorong 17 there, there is one shop selling locks. can try there also. if not head to textile centre, on the ground floor next to entrance to the car park there is a shop selling locks, there might have the hinge you need.

sorri bro, i didnt have the pic.....its exactly like a door hinge only smaller in size

[simonn]

tks bro...i will try DIY...tks for your adv.