Lobangs for watch winders

[triton]

Hmm u mean budget ??

yeah. typo.

[wolfeyes1974]

i think ur suggestion can be considered.

currently, sg got a few places selling. but not exactly cheap.

what u have in mind?

the wolf desgin or something that is a single winder one. that one can strike off your list. this is because if your watch is heavy, there is a potential that it will fall out of this position while winding halfway...

i won't go for wolf.....eilux, i'll consider...

[seiko.citizen]

i think ur suggestion can be considered.

currently, sg got a few places selling. but not exactly cheap.

what u have in mind?

the wolf desgin or something that is a single winder one. that one can strike off your list. this is because if your watch is heavy, there is a potential that it will fall out of this position while winding halfway...

if you are all interested i can organise one for this forum too, and I can check with my aussie mates to see if they want to join in (increase volume and hope for better pricing). also i can use my uncle co for all of the paperwork and save cost as they can do and seperate the consignment if required.

if anyone is interested... maybe we organise one.

[triton]

1) pet

2) marineguy8888

3) triton

[seiko.citizen]

need to agree on a single manufacturer too then we can start talking with them once we have a rough estimate on quantity required.

i think better to PM so i can get the ball rolling once we have numbers

[sys12345]

Interested but how is this MO going to work? The following needs to be agreed upon:

1) Make
2) Model
3) Price

So unless everyone is prepared to go for exactly the same winder, else how are u able to secure a better deal?

need to agree on a single manufacturer too then we can start talking with them once we have a rough estimate on quantity required.

i think better to PM so i can get the ball rolling once we have numbers

[nakedtoes]

Interested parties:

1) pet

2) marineguy8888

3) triton

4) Nakedtoes ( double or triple winder)

I am ok with any brand but must be reliable one.. best is we can stick to one brand and then decide how many winder we need..

[triton]

Interested parties:

1) pet

2) marineguy8888

3) triton

4) Nakedtoes ( double or triple winder)

I am ok with any brand but must be reliable one.. best is we can stick to one brand and then decide how many winder we need..

yeah. agreed. think marineguy888 and me likely to go for Luxupak

[sys12345]

If u guys are interested in Luxupak, i may be able to assist since i've been in touch with them. I'm considering getting the 3 watch winder from Luxupak. Good thing is that they now have 220V AC/DC adapter. Its a thing to take note as some other US based winders only comes with a 110V AC/DC adapter.

yeah. agreed. think marineguy888 and me likely to go for Luxupak

[marineguy8888]

Considering the 1pcs ww3618 and 2 pcs WW01911 Leather Single Watch Winder .

[seiko.citizen]

Interested but how is this MO going to work? The following needs to be agreed upon:

1) Make
2) Model
3) Price

So unless everyone is prepared to go for exactly the same winder, else how are u able to secure a better deal?

usually when i organise MOs i insist that everyone agree to the same make. in my opinion model not so much an issue, but of course it is better if all is the same model.

finally price will naturally fall into place after considering the above criterias.

volume orders is more important as such, from my view point, not everyone need to agree on same model.

If u guys are interested in Luxupak, i may be able to assist since i've been in touch with them. I'm considering getting the 3 watch winder from Luxupak. Good thing is that they now have 220V AC/DC adapter. Its a thing to take note as some other US based winders only comes with a 110V AC/DC adapter.

you would be in a very good position. since you are repeat customer

[triton]

hey bros... Ask u all ah... Is it reasonable for a 4 pc watch winder that winds 2watches on a left holder and 2 watches on right holder, made of solid oak, runs on AC/DC and priced at S$450 ???

if it's running using 2 motors and allow you to have directional options and TPDs programming...$450 is consider reasonable....

jazz_samz: the one you mentioned, if im not mistaken should be running on 2 separate motors. this means that if you put 2 watches on 1 holder, both watches need to be wound in the same direction. this would mean the left holder is independent of the right holder. i could be wrong, best is email and clarify.

wolfeyes1974: based on a 1.4 exchange rate, it would cost about 630 which would put each motor for 315. i got an eilux triple winder for about 700 which allows me to have 3 separate motors, aka about 233 per motor.

abit hard to compare here because one is apple and the other is orange. however, if u already got 2 pairs of watches which requires smiliar TPD and winding direction, then this model might be suitable.

[wolfeyes1974]

jazz_samz: the one you mentioned, if im not mistaken should be running on 2 separate motors. this means that if you put 2 watches on 1 holder, both watches need to be wound in the same direction. this would mean the left holder is independent of the right holder. i could be wrong, best is email and clarify.

wolfeyes1974: based on a 1.4 exchange rate, it would cost about 630 which would put each motor for 315. i got an eilux triple winder for about 700 which allows me to have 3 separate motors, aka about 233 per motor.

abit hard to compare here because one is apple and the other is orange. however, if u already got 2 pairs of watches which requires smiliar TPD and winding direction, then this model might be suitable.

bro, think u got yr eilux 1-2 yrs ago? prices have gone up...my single winder cost only $150+ then...now it's $230+ i think...

[jazz_samz]

Triton, actually, that watch winder I refer to is found in Hobbylink website.. :P

[triton]

bro, think u got yr eilux 1-2 yrs ago? prices have gone up...my single winder cost only $150+ then...now it's $230+ i think...

ok. was quoted about 800 before discount. even if i put 100 more, the cost per motor is still cheaper.